GET QUOTE

Custom Tube Processing Solutions for HVAC, Refrigeration, & Data Center Cooling

Turnkey tube-processing lines built for coils, circuits, and liquid-cooling assemblies.
We design and integrate the cells that matter most—tube bending, cutting, end forming, welding—with optional fin and finned-tube stages. Share your parts and takt time, and we’ll return a practical line layout that fits your throughput, quality targets, and floor space.

HVAC and Refrigeration Manufacturing

Keep coil and circuit production consistent from first article to volume. We build cells and integrated lines for serpentine coils, hairpins and U-bends, headers, and pre-formed line sets. Clean cuts, precise end forms, stable bends, and reliable welds shorten changeovers and raise first-pass yield. Your team gets a dependable, repeatable flow that slots into existing material handling and inspection.
Faster changeovers and stable takt across shifts
Cleaner joints that assemble and braze without rework
Better repeatability for pitch, angle, and alignment
Smooth hand-off to downstream leak testing and packaging

Data Center Liquid Cooling

For liquid-cooling loops and distribution manifolds, we combine stainless or copper tube bending with clean assembly and traceability. The result is tidy routing, consistent geometry, and fixtures that make operators fast and confident. We can add welding cells and end-of-line checks so the loop is production-ready.
Neat routing with predictable fit-up
Consistent end forms that seal right the first time
Line balance for low operator load and steady takt
Documentation and labeling ready for your MES
Tubing and finned tube equipment

Products We Supply

A focused line card you can configure into single cells or a complete line. No specs here—just the right building blocks for your project.

Tube Bending Machine

CNC, 3D, and continuous bending of coils, circuits and space constrained routing.

Tube Cutting Machine

Clean cuts that prepare tubes for end forming and welding with less downstream rework.

Tube Straightening & Cutting Machine

In-line straightening with synchronized cutting for steady upstream flow.

Tube End Forming Machine

Expand, reduce, flare, bead, and other forms to match your fittings and joint design.

Tube Welding Machine

Stable, operator-friendly welding cells for tube-to-tube and tube-to-fitting assemblies.

Integrated Tube Processing Machine

Straighten, cut, end-form, bend, and weld in one coordinated line with fixtures and handling.

Fin Processing Machine

Fin manufacturing modules that pair with coil production when needed.

Finned Tube Machinery

Finned-tube forming to complement heat-exchange builds.

Custom Tube Processing Machine

Purpose-built equipment or layouts for unique parts, takt, and footprints.
Crafts

What We Can Do

Find all types of commercial heat exchanger machinery crafts offering by Tube Fabrication Machine.

  • Bending

    CNC and multi-station bending for tight, repeatable geometries—serpentines, hairpins, U-bends, elbows, and complex 3D routes.

  • Cutting and Preparation

    Straight, clean cuts that protect sealing surfaces and set up accurate end forming and welding.

  • End Forming

    Expand, reduce, flare, bead, and other forms matched to your fittings, valves, and manifolds. Fixtures make repeatability easy.

  • Welding and Assembly

    Operator-safe welding cells with simple tooling and clear guidance. Clean, consistent joints built for downstream testing.

  • Integrated Lines

    From single cells to end-to-end lines: handling, fixtures, poka-yokes, guarding, changeover aids, labeling, and traceability.

Process and Quality

Review line layout. We examine parts, takt and flow and map stations and handling.

Tooling and Fixtures

We develop the jigs to ensure operators are fast and alignment is consistent.

Build and Try-out

Cells are tested using representative parts prior to shipment.

On-site or remote assistance

We help your team start up smoothly with hands-on support and practical training.

Engineering Collaboration

Bring drawings, a parts list, and your output targets. We will:

  • Step

    Assessment

    We review your drawings, BOM, and production targets to understand your goals.

  • Step

    Technical Analysis & Proposal

    Our engineers analyze your project and propose a plan with recommendations for DFM, line layout, and more.

  • Step

    Solution Alignment & Implementation

    We finalize the plan with you and our team assists with implementation.

  • Step

    Validation & Continuous Improvement

    We support you through FAI and pilot runs, using the results to optimize the process.

Certifications

Compliance and Standards

Machine guarding, safety interlocks, and EHS practices are designed to align with project requirements. We support documentation for conformity (for example, CE or UL where applicable) and can prepare training materials and checklists for your site.
Cases

Project Snapshots

  • HVAC Coil Producer

    A plant struggled with variable pitch on serpentine coils and frequent end-form rework. We paired a serpentine bending cell with a clean cutting station and simple fixtures. Pitch variation dropped and first-pass yield rose, while changeovers became a checklist task.

  • Commercial Refrigeration OEM

    Hairpins and U-bends were consistent, but welding slowed the line. A compact welding cell with guided tooling and clear indicators lifted throughput and cut operator fatigue. Final leak checks moved from exception to routine confirmation.

  • Data Center Cooling Integrator

    Stainless routing for a liquid-cooling loop required tidy paths and repeatable end forms. A 3D bending cell with dedicated fixtures plus an end-forming station produced assemblies that fit first time during cabinet build.

Start with a Fast Line Layout Review

Tell us about your parts, takt time, and floor space. We will map a practical sequence of stations, fixtures, and handling, and outline options for automation and changeover. You will get a clear starting point for timeline and budget.

Frequently Asked Questions

Got questions? Take a look at our quick answers caring for your concerns.

Contact Support

  • Can you review our parts and estimate a realistic line layout?

    Yes. Share drawings, takt targets, and any workflow constraints. We will outline stations, handling, and fixture concepts so you can align teams fast.

  • Do you build custom equipment or only standard machines?

    Tube Fabrication Machine offers you custom alloys and types of tube and finned tube machines, including CNC, 3D bending, straightening, cutting, forming, welding tubing crafts, and parts feeding stations. We supply standard machines and purpose-built equipment. If your parts or takt demand something unique, we will design to those needs. We could also provide private-label or white label services. Customization services are available according to your demands

  • Does Tube Fabrication Machine provide install and tuning services?

    Yes. We provide on-site set up services. Install, commissioning, calibration and debugging services are offered by our engineers. You can send us your lead time demands and we offer you ideal solutions.

  • Does Tube Fabrication Machine offer components for replacement after warranty period?

    Yes, the cooperation support will not end after the warranty period. But the price of component for replacement should be at cost price, while in the warranty period this price is free. In addition, if you offer a new order of equipment, the price could be communicated.

  • What INCOTERMS does Tube Fabrication Machine accept?

    All 11 Types of Delivery Terms Accepted: EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP

  • Can you connect to our traceability or MES?

    We can label outputs and prepare the data your system needs. If required, we can align the line with your existing traceability approach.

Scroll to Top